아웃보드ML-4D/OUT-E (Euroblock connectors)
Line Output Dante Converter with built-in DSP Mixer
4-Channel Line Output Dante Converter with built-in DSP Mixer
ML-4D/OUT-E
Built-in DSP 4 line outputs Dante converter to respond to various needs of contractor market and professional audio scene.
ML-4D / OUT-E는 Dante를 통한 인풋 신호를 4 채널 라인 출력 신호로 변환하는 소형 컨버터입니다. ML-4D / OUT-E는 표준 1U 랙 크기의 절반 크기로 디자인 되었습니다. 탑재된 DSP 믹서로 TASCAM Dante 프로세서 시리즈가 제공하는 다양한 인/아웃풋으로 소규모 공연과 행사 시스템에 적합합니다. ML-4D / OUT-E는 최대 96kHz / 24bit를 지원하며 아날로그 아웃풋을 위해 Euroblock 커넥터를 사용합니다.
Spec description
| General | |
| Formats and channels | 44.1/48/88.2/96kHz,16/24-bit, 4 channels |
| Input/output ratings | |
| DATA/DATA+PoE connectors | |
| Connector | RJ-45 |
| Transmission protocol | Dante |
| Gigabit Ethernet standard | 1000BASE-T (IEEE 802.3ab) |
| Cables | category 5e or faster STP cables |
| ANALOG OUT connectors | |
| Connector | Euroblock (balanced) 3.81 mm pitch |
| Nominal output levels | +4 dBu (when Ref. Level not -9 dBFS) +6 dBu (when Ref. Level set to -9 dBFS) |
| Maximum output level (switchable) | +15 dBu (Ref. Level: -9 dBFS) +18 dBu (Ref. Level: -14 dBFS) +20 dBu (Ref. Level: -16 dBFS) +22 dBu (Ref. Level: -18 dBFS) +24 dBu (Ref. Level: -20 dBFS) |
| Output impedance | 200 Ω or lower |
| Control input/output | |
| External control connectors(LED/SWITCH) | |
| Connectors | Euroblock 3.81mm pitch |
| LED connectors | |
| Output format | open collector (10Ω output impedance, 48V withstand voltage, 35mA maximum current) |
| Low level maximum output voltage | 0.5 V |
| SWITCH connectors | |
| Maximum input voltage | 5.5 V |
| High level minimum input voltage | 2.31 V |
| Low level maximum input voltage | 0.99 V |
| External control connectors (CONTROL) | |
| Connectors | Euroblock 3.81mm pitch |
| 10V/CONTROL/GND connectors | Connect variable resistors (10kΩ recommended) |
| Other | |
| Power | PoE class 0 TASCAM PS-P1220E AC adapter (sold separately) |
| Power consumption | 4W |
| Dimensions | 483 x 45 x 303.8 mm (W x H x D, including protrusions) |
| Weight | 863 g |
| Operating temperature range | 0°C-40°C |
Audio performance
| DANTE IN → LINE OUT | |
| Frequency response | +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA) +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA) |
| Distortion (THD+N) | 0.002 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA) |
| S/N ratio | 108 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
| Crosstalk | 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
| Dynamic range | 108 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Note: JEITA indicates compliance with JEITA CP-2150
MM-4D/IN, ML-4D/OUT, MM-2D, AE-4D comparison chart
Input channels
| Products | Analog (Mic/Line) | Digital (AES/EBU) | Digital (Dante) |
| MM-4D/IN-X | 4ch | - | 4ch |
| MM-4D/IN-E | 4ch | - | 4ch |
| ML-4D/OUT-X | - | - | 4ch |
| ML-4D/OUT-E | - | - | 4ch |
| MM-2D-X | 2ch | - | 4ch |
| MM-2D-E | 2ch | - | 4ch |
| AE-4D | - | 4ch | 4ch |
Output channels
| Products | Analog (Line) | Digital (AES/EBU) | Digital (Dante) |
| MM-4D/IN-X | - | - | 4ch |
| MM-4D/IN-E | - | - | 4ch |
| ML-4D/OUT-X | 4ch | - | 4ch |
| ML-4D/OUT-E | 4ch | - | 4ch |
| MM-2D-X | 2ch | - | 4ch |
| MM-2D-E | 2ch | - | 4ch |
| AE-4D | - | 4ch | 4ch |
Input/Output/GPI connectors
| Products | Analog | Digital (AES/EBU) | Digital (Dante) | GPI |
| MM-4D/IN-X | XLR | - | RJ45 | - |
| MM-4D/IN-E | Euroblock | - | RJ45 | Euroblock |
| ML-4D/OUT-X | XLR | - | RJ45 | - |
| ML-4D/OUT-E | Euroblock | - | RJ45 | Euroblock |
| MM-2D-X | XLR | - | RJ45 | - |
| MM-2D-E | Euroblock | - | RJ45 | Euroblock |
| AE-4D | - | XLR | RJ45 | - |